VIBRANT PERFORMANCE

7.5in x 2in Rectang ular Stainless Steel Tip

Exhaust Tip - Weld-On - 2.5 in Inlet - 2 x 7.5 in Rectangle Outlet - 9.5 in Long - Single Wall - Rolled Edge - Straight Cut - Stainless - Polished - Each

7.75in x 1.875in Rectang ular Stainless Steel Tip

Exhaust Tip - Weld-On - 2.25 in Inlet - 1.875 x 7.75 in Rectangle Outlet - 9.5 in Long - Single Wall - Rolled Edge - Straight Cut - Stainless - Polished - Each

7/8in (22mm) ID x 5 ft l ong Silicone Heater Hose

Silicone Hose - 7/8 in ID - 5 ft - Silicone - Black - Heater - Each

74mm Throttle Body To 3in HD Clamp

Throttle Body Adapter - 74 mm Throttle Body - 3 in Clamp - O-Ring / Hardware Included - Aluminum - Black Anodized - Bosch Throttle Body - Each

82mm Throttle Body To 3.5in HD Clamp

Throttle Body Adapter - 82 mm Throttle Body - 3.5 in Clamp - O-Ring / Hardware Included - Aluminum - Black Anodized - Bosch Throttle Body - Each

82mm Throttle Body To 3in HD Clamp

Throttle Body Adapter - 82 mm Throttle Body - 3 in Clamp - O-Ring / Hardware Included - Aluminum - Black Anodized - Bosch Throttle Body - Each

8AN Female Flare to Male 10 ORB Adapter 7/8 x 14

Fitting - Adapter - Straight - 8 AN Female to 10 AN Male O-Ring - Aluminum - Black Anodized - Each

8AN Female Flare to Male 6 ORB Adapter 9/16 x 18

Fitting - Adapter - Straight - 8 AN Female to 6 AN Male O-Ring - Aluminum - Black Anodized - Each

90 Deg Alum Bend

Aluminum Tubing Bend - 90 Degree - Mandrel - 4 in Diameter - 3 in Radius - 2 in / 5 in Leg - 2.2 mm Thickness - Aluminum - Brushed - Each

90 Deg Aluminum Elbow 2-1/2in OD x 3in Long

Aluminum Tubing Bend - 90 Degree - Mandrel - 2.5 in Diameter - 3.75 in Radius - 3.25 in Legs - 1.7 mm Thickness - Aluminum - Polished - Each

90 Deg Aluminum Elbow 2in OD x 4-1/2 in Long

Aluminum Tubing Bend - 90 Degree - Mandrel - 2 in Diameter - 2.5 in Radius - 4 in Legs - 1.8 mm Thickness - Aluminum - Polished - Each

90 Deg ALuminum Elbow 3-1/2in OD x 2-1/2in Lng

Aluminum Tubing Bend - 90 Degree - Mandrel - 3.5 in Diameter - 4.75 in Radius - 2 in Legs - 1.8 mm Thickness - Aluminum - Polished - Each

90 Deg Aluminum Elbow 3in OD x 2-1/2in Long

Aluminum Tubing Bend - 90 Degree - Mandrel - 3 in Diameter - 4.5 in Radius - 2.5 in Legs - 1.5 mm Thickness - Aluminum - Polished - Each

90 Deg Aluminum Elbow 4in OD x 2-1/2in Long

Aluminum Tubing Bend - 90 Degree - Mandrel - 4 in Diameter - 4.625 in Radius - 2 in Legs - 1.8 mm Thickness - Aluminum - Polished - Each

90 Degree Adapter Fittin g -10 AN to 1/2in NTP

Fitting - Adapter - 90 Degree - 10 AN Male to 1/2 in NPT Male - Aluminum - Blue Anodized - Each

90 Degree Adapter Fittin g -10 AN to 3/8in NTP

Fitting - Adapter - 90 Degree - 10 AN Male to 3/8 in NPT Male - Aluminum - Black Anodized - Each

90 Degree Adapter Fittin g -12 AN to 3/4in NTP

Fitting - Adapter - 90 Degree - 12 AN Male to 3/4 in NPT Male - Aluminum - Black Anodized - Each

90 Degree Adapter Fittin g -3 AN to 1/8in NTP

Fitting - Adapter - 90 Degree - 3 AN Male to 1/8 in NPT Male - Aluminum - Black Anodized - Each

90 Degree Adapter Fittin g -4 AN to 1/4in NTP

Fitting - Adapter - 90 Degree - 4 AN Male to 1/4 in NPT Male - Aluminum - Blue Anodized - Each

90 Degree Adapter Fittin g -4 AN to 1/8in NTP

Fitting - Adapter - 90 Degree - 4 AN Male to 1/8 in NPT Male - Aluminum - Blue Anodized - Each

90 Degree Adapter Fittin g -4 AN to 3/8in NTP

Fitting - Adapter - 90 Degree - 4 AN Male to 3/8 in NPT Male - Aluminum - Black Anodized - Each

90 Degree Adapter Fittin g -6 AN to 1/4in NTP

Fitting - Adapter - 90 Degree - 6 AN Male to 1/4 in NPT Male - Aluminum - Blue Anodized - Each

90 Degree Adapter Fittin g -6 AN to 3/8in NTP

Fitting - Adapter - 90 Degree - 6 AN Male to 3/8 in NPT Male - Aluminum - Blue Anodized - Each

90 Degree Adapter Fittin g -6AN to 1/2in NTP

Fitting - Adapter - 90 Degree - 6 AN Male to 1/2 in NPT Male - Aluminum - Black Anodized - Each

90 Degree Adapter Fittin g -8 AN to 1/2in NTP

Fitting - Adapter - 90 Degree - 8 AN Male to 1/2 in NPT Male - Aluminum - Blue Anodized - Each

90 Degree Adapter Fittin g -8 AN to 1/4in NTP

Fitting - Adapter - 90 Degree - 8 AN Male to 1/4 in NPT Male - Aluminum - Black Anodized - Each

90 Degree Adapter Fittin g -8 AN to 3/8in NTP

Fitting - Adapter - 90 Degree - 8 AN Male to 3/8 in NPT Male - Aluminum - Blue Anodized - Each

90 Degree Brushed Mandre l Bend 1.50in O.D.

Exhaust Bend - 90 Degree - Mandrel - 1.5 in Diameter - 1.5 in Radius - 1.5 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 1.50in O.D; Leng

Exhaust Bend - 90 Degree - Mandrel - 1.5 in Diameter - 1.5 in Radius - 2.75 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 1.75in O.D.

Exhaust Bend - 90 Degree - Mandrel - 1.75 in Diameter - 1.75 in Radius - 1.75 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 1.875in O.D.

Exhaust Bend - 90 Degree - Mandrel - 1.875 in Diameter - 1.875 in Radius - 1.875 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 2.00in O.D.

Exhaust Bend - 90 Degree - Mandrel - 2 in Diameter - 2 in Radius - 2 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 2.00in O.D; Leng

Exhaust Bend - 90 Degree - Mandrel - 2 in Diameter - 2 in Radius - 3.23 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 2.25in O.D.

Exhaust Bend - 90 Degree - Mandrel - 2.25 in Diameter - 2.25 in Radius - 2.25 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 2.50in O.D.

Exhaust Bend - 90 Degree - Mandrel - 2.5 in Diameter - 2.5 in Radius - 2.5 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 2.50in O.D; Leng

Exhaust Bend - 90 Degree - Mandrel - 2.5 in Diameter - 2.5 in Radius - 4.13 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 2.75in O.D.

Exhaust Bend - 90 Degree - Mandrel - 2.75 in Diameter - 2.75 in Radius - 2.75 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 3.00in O.D.

Exhaust Bend - 90 Degree - Mandrel - 3 in Diameter - 3 in Radius - 3 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 3.00in O.D; Leng

Exhaust Bend - 90 Degree - Mandrel - 3 in Diameter - 3 in Radius - 4.33 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 3.50in O.D.

Exhaust Bend - 90 Degree - Mandrel - 3.5 in Diameter - 3.5 in Radius - 3.5 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 4.00in O.D.

Exhaust Bend - 90 Degree - Mandrel - 4 in Diameter - 4 in Radius - 4 in Legs - Stainless - Natural - Each

90 Degree Brushed Mandre l Bend 4.00in O.D; Leng

Exhaust Bend - 90 Degree - Mandrel - 4 in Diameter - 4 in Radius - 5.91 in Legs - Stainless - Natural - Each

90 Degree Cast Aluminum Elbow 3in OD

Aluminum Tubing Bend - Tight Radius - 90 Degree - Mandrel - 3 in Diameter - 2.375 in Radius - 0.625 in Legs - 0.125 in Thickness - Aluminum - Natural - Each

90 Degree Elbow Forged H ose End Fitting -16AN

Fitting - Hose End - 90 Degree - 16 AN Hose to 16 AN Female - Aluminum - Black Anodized - Each

90 Degree Elbow Forged H ose End Fitting -6AN

Fitting - Hose End - 90 Degree - 6 AN Hose to 6 AN Female - Aluminum - Black Anodized - Each

90 Degree Elbow Forged ose End Fitting -10AN

Fitting - Hose End - 90 Degree - 10 AN Hose to 10 AN Female - Aluminum - Black Anodized - Each

90 Degree Female Pipe Coupler Fitting 1/8

Fitting - Adapter - 90 Degree - 1/8 in NPT Female to 1/8 in NPT Female - Aluminum - Black Anodized - Each

90 Degree Female to Male Pipe Adapter Fitting 1/8

Fitting - Adapter - 90 Degree - 1/8 in NPT Female to 1/8 in NPT Male - Aluminum - Black Anodized - Each

90 Degree High Flow Swiv el Hose End Fitting -10

Fitting - Hose End - 90 Degree - 10 AN PTFE Hose to 10 AN Male O-Ring - Aluminum - Black Anodized - Each

90 Degree High Flow Swiv el Hose End Fitting -6

Fitting - Hose End - 90 Degree - 6 AN PTFE Hose to 8 AN Male O-Ring - Aluminum - Black Anodized - Each

90 Degree High Flow Swiv el Hose End Fitting -8

Fitting - Hose End - 90 Degree - 8 AN PTFE Hose to 8 AN Male O-Ring - Aluminum - Black Anodized - Each

90 Degree Hose End Fitti ng; Hose Size: -10AN

Fitting - Hose End - 90 Degree - 10 AN Hose to 10 AN Female - Swivel - Aluminum - Black Anodized - Each